We are the professional manufacturer and exporter of UNS N06625 Stud bolt ,Inconel 625 Stud bolt, N06625 Hex bolt in china.
AISI Alloy 625 Alloy 686 Stud Bolt
Alloy Steel En2 4856 En2 4606 JIS
Stud Bolt Full Thread Uns N06625 N06686 Inconel
| Inconel 625 Chemical Composision |
| C |
Cr |
Ni |
Co |
Mo |
Al |
Ti |
Nb |
Fe |
Mn |
Si |
P |
S |
Cu |
| No Greater Than |
No Greater Than |
| ≤0.10 |
20.0~23.0 |
I |
≤1.00 |
8.0~10.0 |
0.40 |
0.40 |
3.15~4.15 |
5.00 |
0.50 |
0.50 |
0.015 |
0.015 |
0.07 |
Exotic Alloy Inconel 625 stud bolt Mechanical Properties
| Tensile Properties |
Lasting Performance |
Hardness |
| θ/ºC |
σb/MPa |
σP0.2/MPa |
δ5/% |
θ/ºC |
σ/MPa |
t/h |
δ5/% |
| Greater Than |
Greater Than |
| 20 |
830 |
410 |
30 |
815 |
114 |
23 |
15 |
HB≤290 |
Material: Inconel 625 stud bolt,Inconel 625 hex bolt
·Finish: plain
·Certificate: ISO9001:2008, SGS
·Packaging Detail: 20-25kgs per carton, 36-48 cartons per pallet or according to customer's requirement.
·Customer Service: 24-ours standby, Critical listening your every suggestion and feedback ASAP.
Our special materials are Hastelloy C-276, Hastelloy C-22, Hastelloy B3, Incoloy 825, Incoloy 925, Incoloy 926, Incoloy 800HT, Inconel 600, Inconel 625, Inconel X-750, Inconel 725, Inconel 718, Monel 400, Monel404, Monel K500, Duplex 2205, Super Duplex UNS32750, Super Austentic 904L, Super Austentic F44, Titanium, Nimonic 80A, GH113, GH3039, GH2032, Precipitation-hardening 17-4PH, Super Austentic 20Cb-3, Super Austentic 6XN, Austentic 347H etc. Our hot forged fastener size range is from M5-M100.
| Commodity |
Size |
Rating |
ASTM Specification |
| Stud Bolts |
1/2″ - 4″ |
Any Length |
ASTM 468 |
ASTM Specifications for Bolt Fasteners
| A193 |
- Alloy steel and stainless steel bolting materials for high temperature or high pressure service. |
| A307 |
- Carbon steel bolts and studs, 60,000 psi tensile strength. |
| A320 |
- Alloy steel and stainless steel bolting materials for low temperature service. |
| A325 |
- Structural bolts, steel, heat treated, 120/105 ksi minimum tensile strength. |
| A354 |
- Quenched and tempered alloy bolts, studs, and other externally threaded fasteners. |
| A449 |
- Quenched and tempered steel bolts and studs for general use. |
| A490 |
- Structural bolts, alloy steel, heat treated, 150 ksi minimum tensile strength. |
| F568 |
- Standard for metric bolts, screws and studs that are used in general engineering applications |
| F593 |
- Stainless steel bolts, hex cap screws, and studs. |
| F1554 |
- Anchor bolts designed to anchor structural supports to concrete foundations. |
ASTM Specifications for Nut Fasteners
| A194 |
- Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service |
| A563 |
- Standard Specification for Wrought Cobalt-20Nickel-20Chromium-3.5Molybdenum-3.5Tungsten-5Iron Alloy for Surgical Implant Applications |
| A594 |
- Standard Specification for Stainless Steel Nuts , Corrosive service applications |
| F467 |
- Standard Specification for Nonferrous Nuts for General Use , general use |
ASTM Specifications for Washers
| F436 |
- Specification for Hardened Steel Washers , carbon steel, steel, washers, weathering steel, Hardened steel washers |
| F844 |
- Standard Specification for Washers, Steel, Plain (Flat), Unhardened for General Use |
| F959 |
- Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners |
INCONEL625 THREADED RODS,INCONEL625 STUD BOLT
Inconel 600 inconel 625 stud bolt
AISI Alloy 625 Alloy 686 Stud Full Thread Uns N06625 N06686 Inconel Alloy Steel En2 4856 En2 4606 JIS
UNS N06625 Inconel 625Hex Bolts PMI test
1. Standard: DIN975/DIN976, ASME/ANSI
2. Grade: Inconel 625 ,UNS N06625 , 2.4856 studs bolt
3. Material: Inconel 625 ,UNS N06625 , 2.4856 studs bolt
4. Colour: Bright
5. Package: Bulk in 25 kg carton, then in pallet
6. Delivery time: 35days
| Inconel series |
Inconel600/601/617/625/718/X750 |
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}