ASTM A193 Grade B16 Stud Bolt, A193 B16 Stud Bolt, A194 Gr. 7 Hex Nuts

• Customization: Available
• Material: Carbon Steel
• Surface Finishing: Zinc Plated
• Model NO.: A193 B16
• Grade: A
• Certification: ISO, CE
• Customized: Customized
• Steel Grade: 3.6\4.6\4.8\5.6\6.8\8.8\9.8\10.9\12.9
• Transport Package: Playwood Box, Wooden Case
• Trademark: C&N
• Origin: China
• Production Capacity: 100tons/Month

Product Description

ASTM A193 GRADE B16 Stud bolt,A193 B16 Stud bolt ASTM A193 GRADE B16 Stud bolt is made of A heat treated chromium-molybdenum-vanadium steel recommended for high pressure, high temperature service. (-50° to 1100° ) ASTM A193 Grade B16 is a standard material specification under ASTM A193, for alloy steel bolting material, for use in high tensile, high temperature and special purpose applications. Grade B16 is a heat-treated chromium-molybdenum-vanadium (Cr-Mo-V) alloy steel with maximum tensile strength of 860 MPa, yield 725, and 35HRC hardness. A193 GRADE B16 Stud bolt ASTM A193 B16 Stud bolt ASTM A193 GRADE B16 Stud bolt ASTM A193 B16 stud bolt Chemical Composition CarbonManganese, maxPhosphorus, maxSulfur, maxSiliconChromiumMolybdenumVanadiumAluminium0.36 - 0.470.45 - 0.700.035 max0.040 max0.15 - 0.350.80 - 1.150.50 -…

ASTM A193 B16 stud bolt Chemical Composition

Carbon	Manganese, max	Phosphorus, max	Sulfur, max	Silicon	Chromium	Molybdenum	Vanadium	Aluminium
0.36 - 0.47	0.45 - 0.70	0.035 max	0.040 max	0.15 - 0.35	0.80 - 1.15	0.50 - 0.65	0.25 - 0.35	0.015 max

ASTM A193 Grade B16 stud bolt Mechanical Properties

Diameter	Tensile Strength, Min	Yield Strength, Min	Elongation, Min	Reduction, Min	Hardness, Max
Over M64 to M100	760 MPa	655 MPa	17 %	45 %	321 HBW or 35 HRC
Over M100 to M180	690 MPa	585 MPa	16 %	45 %	321 HBW or 35 HRC

ASTM A193 Grade B16 stud bolt Heat Treatment

Quenched & Tempered at 860º C minimum.

Recommended Nuts & Washers

Nut Grade	Washer Grade
ASTM A194 Grade 16	ASTM F436

Properties: ASTM A193/A193M and ASME SA193/SA193M; B16
• Thread Requirements: ASME B1.1, 2A
- UNC for all stud diameters 1" and smaller
- UN8 for all stud diameters greater than 1"
• Finish: Light Protective Oil
• Product Marking: Grade mark in accordance with ASTM A193/A193M and ASME SA193/SA193M: B16 and manufacturer's identification symbols shall be applied to one end of studs 3/8 in. [10 mm] in diameter and larger. If the available area is inadequate, the grade symbol may be marked on one end and the manufacturer's identification symbol marked on the other end of studs.

How to order our A193 B16 stud bolts?

STUD BOLT + 2 HEX NUTS  1 1/2″ X 255 A193 B16+GR 7   QTY:200 PCS

STUD BOLT, 3" x 770mm UN8 STUD, WITH TWO HEAVY HEX NUTS; ASSEMBLED;

ALLOY STEEL, ASTM A193 GRADE B16 stud bolts, ASTM A194 GRADE 7 HEAVY HEX NUTS.