| Customization: | Available |
|---|---|
| Material: | Stainless Steel |
| Type: | Round Head |
|
Still deciding? Get samples of US$ 1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Stud bolts, a term used for cut-to-length all thread rod, are used for: bolting together flanges, anchor bolting, as well as general fastening. C&N is offering stud bolts in carbon, stainless, along with several special alloys. With stud bolt diameters ranging from 1/2" to 4″. Stud bolts are most commonly available with a plain finish, which is also referred to as Black. However, there are also numerous applications that call for coating/plating, with the most common Teflo-n Blue coating. Teflo-n, or Xylan, coating provides for increased corrosive resistance.
ASTM A193 B6 is a high-temperature ferritic stainless steel (UNS 41000, 410 stainless steel) bolting specification for extreme applications in heavy industry. ASTM A194 Grade 6 nuts (UNS 41000, 410 stainless steel) are the corresponding nut. Grade B6 studs and Grade B6 heavy hex bolts are 12-13 % chromium.
ASTM A193 Grade B6 is a standard material specification for chromium-ferritic stainless steel fasteners, for use in high tensile, high temperature and special purpose applications such as pressure piping & pressure vessels bolting. Grade B6 is a heat-treated 12% chromium-ferritic magnetic 410 stainless steel with minimum tensile strength requirement of 110 ksi and yield 85 ksi. ASTM A193 specification covers requirements for chemical composition, mechanical properties, hardness, heat-treatment and recommended nuts-washers for Grade B6 Fasteners.
picture (ASTM-A193-Grade-B6-AISI-410-Stud-Bolts)
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| B6(AISI 410) | 1.4006 | S41000 | SUS 410 | 410S21 | - | - | X12Cr13 |
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N |
| B6 (AISI 410) | 0.08 - 0.15 | 1.00 max | 1.00 max | 0.040 max | 0.030 max | 11.5 - 13.5 | - | - | - |
| Bolt Grade | Diameter, in. | Tensile Strength, ksi | Yield Strength ksi | Elongation, % | Reduction, % | Hardness |
|---|---|---|---|---|---|---|
| B6 | up to 4, inclusive | 110 | 85 | 15 | 50 | Not Defined |
ASTM A193 Grade B6 and ASTM A194 Grade 6 nuts are supplied in UN8 (8 pitch) rather than UNC.
Type :
Full threads, Partial Threads, and customized as per requirements.
SIZE :
Nom Dia: ¼ to 4″ [6-100 mm]
Tailor made if required.
Length: As Per Standard or Upto any Length
SPECIFICATION / STANDARD :ASTM / ASME / BS / DIN / BS EN ISO
MATERIAL :C.S., M.S., Alloy Steel, Ferritic & Austenitic Stainless Steel
THREADS :UNC, 8UN, UNF, Metric Coarse & Fine Series.
){kind=link}