| Inconel 625 Chemical Composision |
| C |
Cr |
Ni |
Co |
Mo |
Al |
Ti |
Nb |
Fe |
Mn |
Si |
P |
S |
Cu |
| No Greater Than |
No Greater Than |
| ≤0.10 |
20.0~23.0 |
I |
≤1.00 |
8.0~10.0 |
0.40 |
0.40 |
3.15~4.15 |
5.00 |
0.50 |
0.50 |
0.015 |
0.015 |
0.07 |
Exotic Alloy Inconel 625 stud bolt Mechanical Properties
| Tensile Properties |
Lasting Performance |
Hardness |
| θ/ºC |
σb/MPa |
σP0.2/MPa |
δ5/% |
θ/ºC |
σ/MPa |
t/h |
δ5/% |
| Greater Than |
Greater Than |
| 20 |
830 |
410 |
30 |
815 |
114 |
23 |
15 |
HB≤290 |
Material: Inconel 625 stud bolt,Inconel 625 hex bolt
·Finish: plain
·Certificate: ISO9001:2008, SGS
·Packaging Detail: 20-25kgs per carton, 36-48 cartons per pallet or according to customer's requirement.
·Customer Service: 24-ours standby, Critical listening your every suggestion and feedback ASAP.
Our special materials are Hastelloy C-276, Hastelloy C-22, Hastelloy B3, Incoloy 825, Incoloy 925, Incoloy 926, Incoloy 800HT, Inconel 600, Inconel 625, Inconel X-750, Inconel 725, Inconel 718, Monel 400, Monel404, Monel K500, Duplex 2205, Super Duplex UNS32750, Super Austentic 904L, Super Austentic F44, Titanium, Nimonic 80A, GH113, GH3039, GH2032, Precipitation-hardening 17-4PH, Super Austentic 20Cb-3, Super Austentic 6XN, Austentic 347H etc. Our hot forged fastener size range is from M5-M100.
| Commodity |
Size |
Rating |
ASTM Specification |
| Stud Bolts |
1/2″ - 4″ |
Any Length |
ASTM 468 |
ASTM Specifications for Bolt Fasteners
| A193 |
- Alloy steel and stainless steel bolting materials for high temperature or high pressure service. |
| A307 |
- Carbon steel bolts and studs, 60,000 psi tensile strength. |
| A320 |
- Alloy steel and stainless steel bolting materials for low temperature service. |
| A325 |
- Structural bolts, steel, heat treated, 120/105 ksi minimum tensile strength. |
| A354 |
- Quenched and tempered alloy bolts, studs, and other externally threaded fasteners. |
| A449 |
- Quenched and tempered steel bolts and studs for general use. |
| A490 |
- Structural bolts, alloy steel, heat treated, 150 ksi minimum tensile strength. |
| F568 |
- Standard for metric bolts, screws and studs that are used in general engineering applications |
| F593 |
- Stainless steel bolts, hex cap screws, and studs. |
| F1554 |
- Anchor bolts designed to anchor structural supports to concrete foundations. |
ASTM Specifications for Nut Fasteners
| A194 |
- Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service |
| A563 |
- Standard Specification for Wrought Cobalt-20Nickel-20Chromium-3.5Molybdenum-3.5Tungsten-5Iron Alloy for Surgical Implant Applications |
| A594 |
- Standard Specification for Stainless Steel Nuts , Corrosive service applications |
| F467 |
- Standard Specification for Nonferrous Nuts for General Use , general use |
ASTM Specifications for Washers
| F436 |
- Specification for Hardened Steel Washers , carbon steel, steel, washers, weathering steel, Hardened steel washers |
| F844 |
- Standard Specification for Washers, Steel, Plain (Flat), Unhardened for General Use |
| F959 |
- Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners |
INCONEL625 THREADED RODS,INCONEL625 STUD BOLT
1. Standard: DIN975/DIN976, ASME/ANSI
2. Grade: Inconel 625 ,UNS N06625 , 2.4856 studs bolt
3. Material: Inconel 625 ,UNS N06625 , 2.4856 studs bolt
4. Colour: Bright
5. Package: Bulk in 25 kg carton, then in pallet
6. Delivery time: 35days
| Inconel series |
Inconel600/601/617/625/718/X750 |
Audited Supplier 
){kind=link}